linux系统安装oracle数据库基础图文教程

2026-01-21 15:00:38 栏目：香港服务器 3 阅读

服务器系统版本：centos7
数据库版本：11.2.0.4.0

通过oracle官方或者网络途径下载准备oracle数据库安装文件：

p13390677_112040_Linux-x86-64_1of7.zip

p13390677_112040_Linux-x86-64_2of7.zip

1.创建文件夹，上传oracle数据库安装文件，并解压

2.关闭selinux和防火墙

sudo setenforce 0（临时关闭）或修改/etc/selinux/config文件（永久关闭）

永久关闭selinux，设置SELINUX=disabled

vi /etc/selinux/config

关闭防火墙

systemctl stop firewalld

3.安装oracle 11G依赖包

yum install gcc make binutils gcc-c++ compat-libstdc++-33elfutils-libelf-devel elfutils- libelf-devel-static ksh libaio libaio-develnumactl-devel sysstat unixODBC unixODBC-devel pcre-devel –y

若无法连接外网安装或yum源不可用，可修改为可用yum源或下载离线安装包进行安装

4.调整内核参数

编辑系统内核参数配置文件：

vi /etc/sysctl.conf

kernel.shmall = 4294967296
kernel.shmmax = 17179869184
kernel.sem = 510 65280 510 128
kernel.shmmni = 4096
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 1048576
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
fs.file-max = 6815744
fs.aio-max-nr = 1048576
vm.swappiness = 0
vm.dirty_background_ratio = 3
vm.dirty_ratio = 80
vm.dirty_expire_centisecs = 500
vm.dirty_writeback_centisecs = 100
net.ipv4.tcp_sack = 0
net.ipv4.tcp_timestamps = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.tcp_wmem = 262144
net.ipv4.tcp_rmem = 4194304

执行以下命令使配置生效：sysctl -p

5.调整用户权限配置文件

vi /etc/security/limits.conf添加下面内容

oracle      soft   nproc  4097
oracle      hard   nproc  16384
oracle      soft   nofile  1024
oracle      hard   nofile  65536
oracle      hard   stack  10240

6.修改/etc/pam.d/login文件

vi /etc/pam.d/login添加下面两行

session required  /lib64/security/pam_limits.so
session required   pam_limits.so

7.修改/etc/profile文件

vi /etc/profile添加下面内容：


if [ $USER = "oracle" ]; then
  if [ $SHELL = "/bin/ksh" ]; then
      ulimit -p 16384
      ulimit -n 65536
  else
      ulimit -u 16384 -n 65536
  fi
fi

8.新增创建用户组

groupadd -g 200 oinstall
groupadd -g 201 dba
useradd -u 440 -g oinstall -G dba oracle
passwd oracle

9.创建oracle数据库安装目录并配置相应权限

mkdir -p /data/oracle/product/11.2.0
mkdir /data/oracle/oradata
mkdir /data/oracle/inventory
mkdir /data/oracle/fast_recovery_area
chown -R oracle:oinstall /data/oracle
chmod -R 775 /data/oracle

10.配置Oracle环境变量

切换到oracle用户

su -l oracle
vi .bash_profile

添加以下内容

ORACLE_BASE=/data/oracle
ORACLE_HOME=$ORACLE_BASE/product/11.2.0
ORACLE_SID=testorcl
PATH=$PATH:$ORACLE_HOME/bin
export ORACLE_BASE ORACLE_HOME ORACLE_SID PATH

执行source .bash_profile生效

11.编辑静默安装响应文件db_install.rsp

cp -R /data/database/response/ /home/oracle/response/
cd /home/oracle/response/
vi db_install.rsp

将 /data/database/response/ 目录下的文件复制到当前路径 /home/oracle/response/ 下，然后编辑这些文件，重点核对并修改主要参数。

oracle.install.option=INSTALL_DB_SWONLY
ORACLE_HOSTNAME=oracle
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/data/oracle/inventory
SELECTED_LANGUAGES=en,zh_CN
ORACLE_HOME=/data/oracle/product/11.2.0
ORACLE_BASE=/data/oracle
oracle.install.db.InstallEdition=EE
oracle.install.db.DBA_GROUP=dba
oracle.install.db.OPER_GROUP=dba
DECLINE_SECURITY_UPDATES=true

db_install.rsp完整文件：

####################################################################
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved.##
##                                                                ##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
##                                                                ##
## Each variable is associated with a comment. The comment        ##
## can help to populate the variables with the appropriate        ##
## values.							  ##
##                                                                ##
## IMPORTANT NOTE: This file contains plain text passwords and    ##
## should be secured to have read permission only by oracle user  ##
## or db administrator who owns this installation.                ##
##                                                                ##
####################################################################

#------------------------------------------------------------------------------
# Do not change the following system generated value. 
#------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0

#------------------------------------------------------------------------------
# Specify the installation option.
# It can be one of the following:
#   - INSTALL_DB_SWONLY
#   - INSTALL_DB_AND_CONFIG
#   - UPGRADE_DB
#-------------------------------------------------------------------------------
oracle.install.option=INSTALL_DB_SWONLY

#-------------------------------------------------------------------------------
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames 
# and network interfaces)
#-------------------------------------------------------------------------------
ORACLE_HOSTNAME=oracle

#-------------------------------------------------------------------------------
# Specify the Unix group to be set for the inventory directory.  
#-------------------------------------------------------------------------------
UNIX_GROUP_NAME=oinstall

#-------------------------------------------------------------------------------
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
#-------------------------------------------------------------------------------
INVENTORY_LOCATION=/data/oracle/inventory

#-------------------------------------------------------------------------------
# Specify the languages in which the components will be installed.             
# 
# en   : English                  ja   : Japanese                  
# fr   : French                   ko   : Korean                    
# ar   : Arabic                   es   : Latin American Spanish    
# bn   : Bengali                  lv   : Latvian                   
# pt_BR: Brazilian Portuguese     lt   : Lithuanian                
# bg   : Bulgarian                ms   : Malay                     
# fr_CA: Canadian French          es_MX: Mexican Spanish           
# ca   : Catalan                  no   : Norwegian                 
# hr   : Croatian                 pl   : Polish                    
# cs   : Czech                    pt   : Portuguese                
# da   : Danish                   ro   : Romanian                  
# nl   : Dutch                    ru   : Russian                   
# ar_EG: Egyptian                 zh_CN: Simplified Chinese        
# en_GB: English (Great Britain)  sk   : Slovak                    
# et   : Estonian                 sl   : Slovenian                 
# fi   : Finnish                  es_ES: Spanish                   
# de   : German                   sv   : Swedish                   
# el   : Greek                    th   : Thai                      
# iw   : Hebrew                   zh_TW: Traditional Chinese       
# hu   : Hungarian                tr   : Turkish                   
# is   : Icelandic                uk   : Ukrainian                 
# in   : Indonesian               vi   : Vietnamese                
# it   : Italian                                                   
#
# all_langs   : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs  
#------------------------------------------------------------------------------
SELECTED_LANGUAGES=en

#------------------------------------------------------------------------------
# Specify the complete path of the Oracle Home.
#------------------------------------------------------------------------------
ORACLE_HOME=/data/oracle/product/11.2.0

#------------------------------------------------------------------------------
# Specify the complete path of the Oracle Base. 
#------------------------------------------------------------------------------
ORACLE_BASE=/data/oracle

#------------------------------------------------------------------------------
# Specify the installation edition of the component.                        
#                                                             
# The value should contain only one of these choices.        
#   - EE     : Enterprise Edition                                
#   - SE     : Standard Edition                                  
#   - SEONE  : Standard Edition One
#   - PE     : Personal Edition (WINDOWS ONLY)
#------------------------------------------------------------------------------
oracle.install.db.InstallEdition=EE

#------------------------------------------------------------------------------
# This variable is used to enable or disable custom install and is considered
# only if InstallEdition is EE.
#
# true  : Components mentioned as part of 'optionalComponents' property
#         are considered for install.
# false : Value for 'optionalComponents' is not considered.
#------------------------------------------------------------------------------
oracle.install.db.EEOptionsSelection=false

#------------------------------------------------------------------------------
# This variable is considered only if 'EEOptionsSelection' is set to true. 
#
# Description: List of Enterprise Edition Options you would like to enable.
#
#              The following choices are available. You may specify any
#              combination of these choices.  The components you choose should
#              be specified in the form "internal-component-name:version"
#              Below is a list of components you may specify to enable.
#        
#              oracle.oraolap:11.2.0.4.0 - Oracle OLAP
#              oracle.rdbms.dm:11.2.0.4.0 - Oracle Data Mining
#              oracle.rdbms.dv:11.2.0.4.0 - Oracle Database Vault
#              oracle.rdbms.lbac:11.2.0.4.0 - Oracle Label Security
#              oracle.rdbms.partitioning:11.2.0.4.0 - Oracle Partitioning
#              oracle.rdbms.rat:11.2.0.4.0 - Oracle Real Application Testing
#------------------------------------------------------------------------------
oracle.install.db.optionalComponents=oracle.rdbms.partitioning:11.2.0.4.0,oracle.oraolap:11.2.0.4.0,oracle.rdbms.dm:11.2.0.4.0,oracle.rdbms.dv:11.2.0.4.0,oracle.rdbms.lbac:11.2.0.4.0,oracle.rdbms.rat:11.2.0.4.0

###############################################################################
#                                                                             #
# PRIVILEGED OPERATING SYSTEM GROUPS                                  	      #
# ------------------------------------------                                  #
# Provide values for the OS groups to which OSDBA and OSOPER privileges       #
# needs to be granted. If the install is being performed as a member of the   #		
# group "dba", then that will be used unless specified otherwise below.	      #
#                                                                             #
# The value to be specified for OSDBA and OSOPER group is only for UNIX based #
# Operating System.                                                           #
#                                                                             #
###############################################################################

#------------------------------------------------------------------------------
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
#------------------------------------------------------------------------------
oracle.install.db.DBA_GROUP=dba

#------------------------------------------------------------------------------
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
#------------------------------------------------------------------------------
oracle.install.db.OPER_GROUP=dba

#------------------------------------------------------------------------------
# Specify the cluster node names selected during the installation.
# Example : oracle.install.db.CLUSTER_NODES=node1,node2
#------------------------------------------------------------------------------
oracle.install.db.CLUSTER_NODES=

#------------------------------------------------------------------------------
# This variable is used to enable or disable RAC One Node install.
#
#   - true  : Value of RAC One Node service name is used.
#   - false : Value of RAC One Node service name is not used.
#
# If left blank, it will be assumed to be false
#------------------------------------------------------------------------------
oracle.install.db.isRACOneInstall=

#------------------------------------------------------------------------------
# Specify the name for RAC One Node Service. 
#------------------------------------------------------------------------------
oracle.install.db.racOneServiceName=

#------------------------------------------------------------------------------
# Specify the type of database to create.
# It can be one of the following:
#   - GENERAL_PURPOSE/TRANSACTION_PROCESSING             
#   - DATA_WAREHOUSE                                
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.type=

#------------------------------------------------------------------------------
# Specify the Starter Database Global Database Name. 
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.globalDBName=

#------------------------------------------------------------------------------
# Specify the Starter Database SID.
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.SID=

#------------------------------------------------------------------------------
# Specify the Starter Database character set.
#                                              
# It can be one of the following:
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.characterSet=AL32UTF8

#------------------------------------------------------------------------------
# This variable should be set to true if Automatic Memory Management 
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.memoryOption=true

#------------------------------------------------------------------------------
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available 
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.memoryLimit=

#------------------------------------------------------------------------------
# This variable controls whether to load Example Schemas onto
# the starter database or not.
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.installExampleSchemas=false

#------------------------------------------------------------------------------
# This variable includes enabling audit settings, configuring password profiles
# and revoking some grants to public. These settings are provided by default. 
# These settings may also be disabled.    
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.enableSecuritySettings=true

###############################################################################
#                                                                             #
# Passwords can be supplied for the following four schemas in the	      #
# starter database:      						      #
#   SYS                                                                       #
#   SYSTEM                                                                    #
#   SYSMAN (used by Enterprise Manager)                                       #
#   DBSNMP (used by Enterprise Manager)                                       #
#                                                                             #
# Same password can be used for all accounts (not recommended) 		      #
# or different passwords for each account can be provided (recommended)       #
#                                                                             #
###############################################################################

#------------------------------------------------------------------------------
# This variable holds the password that is to be used for all schemas in the
# starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.ALL=

#-------------------------------------------------------------------------------
# Specify the SYS password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYS=

#-------------------------------------------------------------------------------
# Specify the SYSTEM password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYSTEM=

#-------------------------------------------------------------------------------
# Specify the SYSMAN password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYSMAN=

#-------------------------------------------------------------------------------
# Specify the DBSNMP password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.DBSNMP=

#-------------------------------------------------------------------------------
# Specify the management option to be selected for the starter database. 
# It can be one of the following:
#   - GRID_CONTROL
#   - DB_CONTROL
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.control=DB_CONTROL

#-------------------------------------------------------------------------------
# Specify the Management Service to use if Grid Control is selected to manage 
# the database.      
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=

###############################################################################
#                                                                             #
# SPECIFY BACKUP AND RECOVERY OPTIONS                                 	      #
# ------------------------------------		                              #
# Out-of-box backup and recovery options for the database can be mentioned    #
# using the entries below.						      #	
#                                                                             #
###############################################################################

#------------------------------------------------------------------------------
# This variable is to be set to false if automated backup is not required. Else 
# this can be set to true.
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.automatedBackup.enable=false

#------------------------------------------------------------------------------
# Regardless of the type of storage that is chosen for backup and recovery, if 
# automated backups are enabled, a job will be scheduled to run daily to backup 
# the database. This job will run as the operating system user that is 
# specified in this variable.
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.automatedBackup.osuid=

#-------------------------------------------------------------------------------
# Regardless of the type of storage that is chosen for backup and recovery, if 
# automated backups are enabled, a job will be scheduled to run daily to backup 
# the database. This job will run as the operating system user specified by the 
# above entry. The following entry stores the password for the above operating 
# system user.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.automatedBackup.ospwd=

#-------------------------------------------------------------------------------
# Specify the type of storage to use for the database.
# It can be one of the following:
#   - FILE_SYSTEM_STORAGE
#   - ASM_STORAGE
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.storageType=

#-------------------------------------------------------------------------------
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.         
#
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE 
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=

#-------------------------------------------------------------------------------
# Specify the backup and recovery location.
#
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE 
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=

#-------------------------------------------------------------------------------
# Specify the existing ASM disk groups to be used for storage.
#
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.asm.diskGroup=

#-------------------------------------------------------------------------------
# Specify the password for ASMSNMP user of the ASM instance.                  
#
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE 
#-------------------------------------------------------------------------------
oracle.install.db.config.asm.ASMSNMPPassword=

#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username.
#
#  Example   : MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password.
#
# Example    : MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
MYORACLESUPPORT_PASSWORD=

#------------------------------------------------------------------------------
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
#
# Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
#------------------------------------------------------------------------------
SECURITY_UPDATES_VIA_MYORACLESUPPORT=

#------------------------------------------------------------------------------
# Specify whether user doesn't want to configure Security Updates.
# The value for this variable should be true if you don't want to configure
# Security Updates, false otherwise. 
#
# The value can be either true or false. If left blank it will be assumed
# to be false.
#
# Example    : DECLINE_SECURITY_UPDATES=false
#------------------------------------------------------------------------------
DECLINE_SECURITY_UPDATES=true

#------------------------------------------------------------------------------
# Specify the Proxy server name. Length should be greater than zero.
#
# Example    : PROXY_HOST=proxy.domain.com 
#------------------------------------------------------------------------------
PROXY_HOST=

#------------------------------------------------------------------------------
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example    : PROXY_PORT=25 
#------------------------------------------------------------------------------
PROXY_PORT=

#------------------------------------------------------------------------------
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD 
# blank if your proxy server requires no authentication.
#
# Example    : PROXY_USER=username 
#------------------------------------------------------------------------------
PROXY_USER=

#------------------------------------------------------------------------------
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD  
# blank if your proxy server requires no authentication.
#
# Example    : PROXY_PWD=password 
#------------------------------------------------------------------------------
PROXY_PWD=

#------------------------------------------------------------------------------
# Specify the proxy realm. This value is used if auto-updates option is selected.
#
# Example    : PROXY_REALM=metalink 
#------------------------------------------------------------------------------
PROXY_REALM=

#------------------------------------------------------------------------------
# Specify the Oracle Support Hub URL. 
# 
# Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
#------------------------------------------------------------------------------
COLLECTOR_SUPPORTHUB_URL=

#------------------------------------------------------------------------------
# Specify the auto-updates option. It can be one of the following:
#   - MYORACLESUPPORT_DOWNLOAD
#   - OFFLINE_UPDATES
#   - SKIP_UPDATES
#------------------------------------------------------------------------------
oracle.installer.autoupdates.option=
#------------------------------------------------------------------------------
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates 
# are present.
#------------------------------------------------------------------------------
oracle.installer.autoupdates.downloadUpdatesLoc=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username which has the patches download privileges  
# to be used for software updates.
#  Example   : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password which has the patches download privileges  
# to be used for software updates.
#
# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

12.使用静默安装响应文件安装oracle

cd /data/database/
./runInstaller -silent -responseFile /home/oracle/response/db_install.rsp

切换到root账户，执行上面两个脚本

sh /data/oracle/inventory/orainstRoot.sh
sh /data/oracle/product/11.2.0/root.sh

13.配置监听

切换到oracle用户

netca /silent /responseFile /home/oracle/response/netca.rsp

14.创建实例

创建配置文件

vi /home/oracle/response/testorcl.rsp

添加以下内容：

[GENERAL]
RESPONSEFILE_VERSION = "11.2.0"
OPERATION_TYPE = "createDatabase"
[CREATEDATABASE]
GDBNAME = "testorcl"
SID = "testorcl"
TEMPLATENAME = "General_Purpose.dbc"
SYSPASSWORD = "test2026"
SYSTEMPASSWORD = "test2026"
SYSMANPASSWORD = "test2026"
DBSNMPPASSWORD = "test2026"
DATAFILEDESTINATION = /data/oracle/oradata
RECOVERYAREADESTINATION = /data/oracle/fast_recovery_area
CHARACTERSET = "ZHS16GBK"
TOTALMEMORY = "26214"

启动配置：

dbca -silent -responseFile /home/oracle/response/testorcl.rsp

建库实例检查

ps -ef | grep ora_ | grep -v grep

15.查看监听状态

lsnrctl status

16.连接数据库并创建用户账号

sqlplus / as sysdba;

创建用户并授权

CREATE USER 用户名 IDENTIFIED BY 密码;
GRANT CREATE SESSION TO 用户名;

17.工具连接测试

本文地址：https://www.vps345.com/20999.html

上一篇：Linux设置中国时区Asia/Shanghai全攻略

下一篇：Ubuntu24.04 双系统_5060显卡_nvidia驱动_cuda_···

[2026-02-03]

Flutter for OpenHarmony 实战：Window···

[2026-02-03]

向日葵连接Ubuntu22.04黑屏

[2026-02-03]

安卓 Accessibility 服务在测试中的创新···

[2026-02-03]

基于IOT-Tree Server支持的gRPC服务，使···

[2026-02-03]

搭建PX4开发系统（Ubuntu 22.04)

[2026-02-03]

Flutter for OpenHarmony 实战：Window···

[2026-02-03]

向日葵连接Ubuntu22.04黑屏

[2026-02-03]

安卓 Accessibility 服务在测试中的创新···

[2026-02-03]

基于IOT-Tree Server支持的gRPC服务，使···

[2026-02-03]

搭建PX4开发系统（Ubuntu 22.04)

搜索文章

Tags

最新资讯